Suitable for
Tiles
Shower
Toilets
Fittings
Processes
Limescale remover or sanitary cleaner - here both come together
The limescale cleaner from Arvox has been specially developed for limescale contamination. This is caused by hard water and can affect the hygiene of surfaces. Our limescale cleaner is used in sanitary areas on tiles, fittings, in showers, toilets and drains. Most conventional cleaners are based on a formulation with chlorine, but this is toxic in concentrated form. When it comes into contact with water, chlorine gas forms hydrochloric acid. This can cause irritation to mucous membranes, the respiratory tract and the eyes . Concrete materials are also not infinitely acid-resistant and can dissolve if chlorine-based cleaners are used frequently. The use of chlorine cleaners on metals is just as critical, as metals can be severely corroded by the chlorine mixture if used too much.
All of these problems are eliminated with our limescale cleaner and the simple and quick application means you can save time on downtime and cleaning.
No more limescale: The environmentally neutral cleaner from Arvox Pro
Clean results without compromise: Arvox Pro Limescale and Sanitary Cleaner
When cleaning the Atlantis water park in Dorsten, the customer was impressed by the effectiveness. When cleaning the pool, the guests only had to move to another pool for a short period of time. The residues of the cleaner are harmless to the guests and are even biodegradable. In addition, Arvox Pro leaves no chemical smell, so that the guests could swim in the pool again immediately afterwards. In the water park project, the inorganic limescale contamination was covered by organic contamination.
For this reason, we first cleaned with Arvox Pro Joints + Tiles to remove the organic dirt. The advantage here: after the organics were removed, a cave system of lime remained. The lime cleaner was then able to penetrate very well and deeply into this structure and solves the problem directly at the root.
Sanitary cleaning made easy: Long-lasting cleanliness with Arvox Pro
With its 2-component formula, the cleaner dissolves limescale deposits and all inorganic dirt through a reaction with active oxygen. The resulting residues in the rinse water are environmentally neutral and completely biodegradable. The quick and easy application means that downtime can be greatly minimized. Our cleaners are free of chlorine, silicone, solvents and NTA, making them a sustainable choice.
Remove limescale completely from the pores of your wet areas. The 2-component formula leaves only water, oxygen and sodium carbonate as end products, allowing the rinse water to drain easily down the drain.
Available as
2 x 0.4L set in Twin Sprayer
4 x 0.4L Reload Set
2 x 5L set
For further information please see the product data sheet:
Contact